Torus RM 20 BAL AVR, CS
20 BAL AVR S
(Silver) and CS
20 BAL AVR B (Black)
Torus Power AVR
(Automatic Voltage Regulation) is a full-feature state-of-the-art
power conditioner, isolating and protecting your system. Like all
Torus Power products, the AVR series provides true isolation (using
massive toroidal transformers) Torus AVR provides stable output
voltage to keep equipment running in the optimal range of
120VAC ± 5V (115V
to 125V) for any input voltage ranging from 170VAC to 270VAC. AVR
Series uses a microprocessor to monitor and control incoming
voltages. Torus Power AVR series protects all connected equipment
from the risk of severe power line surges using series-mode surge
suppression.
Rear Panel View
Line cord is included.
|
|
RM 20 BAL AVR, CS 20 BAL AVR 3U Rack, 20 Amp, 10 outlets
Input Voltage Range: 170VAC to 270VAC
Frequency Range: 57-63 Hz
Input Current Limiting:
10A Circuit Breaker Front Panel
Input (inlet) connector Rear panel: 20A inlet
Line Cord (included): Type C or B
(For
information on line cords, receptacles, and power inlets, see
Customer Care.)
Input current rating: 10A
Output Voltage Range: 120VAC ± 5V (115V to 125V)
Output Current Limiting: N/A
Output connector: Medical Grade Duplex 20A (Qty 5) 10 Outlets
Surge Suppression: Meets IEEE C62.41-1991:
Series mode type; built to withstand 6000 volts, 3000 amps for 1000
repeats; with clamping voltage of 2 volts above peak nominal voltage.
Noise Reduction: Performs as low pass
filter, attenuating noise from 2kHz to 1mHz, with attenuation of
12 db/decade to 500 kHz.
Interfaces: RS232, Ethernet via
built-in web browser
Triggers: 2 x 12volt
Weight: 100.5lbs
(45.7Kg)
19" Rack Mount Faceplate
Size (w x d x h) (inch): 19 x 22.25 x 6.25 Size (w x d x h) (mm): 483 x
565 x 159
17" Consumer Series Faceplate Size (w x d x h) (inch): 17
x 22 x 6.4
Size (w x d x h) (mm):
432 x 556 x 162 |