TORUS PRODUCTS
North American Models
North American Standard Series (120 VAC, 60 Hz)
North America Automatic Voltage Regulation Series (AVR) (70 - 135 VAC, 60 Hz)
RM Series
IS
Custom Installation Series
North American - Dual Balanced Input Series (2 x 120V, 60 Hz )
Dual Balanced Input (2 x 120V, 60 Hz )
Dual Balanced Input With AVR (Automatic Voltage Control, 60 Hz)
Custom Installation
International Models
International Automatic Voltage Regulation (AVR) Series (170 - 270 VAC, 50 - 60 Hz)
International Standard Series (220 - 240 VAC, 50-60 Hz)
Las Vegas Convention Centre Booth Number: C12239 Torus Power uses Plitron Toroidal Isolation Transformers to isolate critical systems Read More...
Opinion Written by Jeff Fritz By now you know which components comprise TWBAS 2012, which means it’s time for Read More...
These were the few power line conditioners we managed to lay our hands on in 2011. While I had tested Read More...
Industry Affiliations
20 Amp – Rack, Shelf Mount
Power Conditioning and Automatic Voltage Regulation (AVR).
Torus 120V Single Phase Input
20AMP Units
RM 20 AVR
CS 25 AVR
- Plug into standard household outlets
- Provide Clean AC Power and Surge Suppression that really works
- Available in 2 styles - Rack Mount & CS (Silver or Black)
Torus RM 20 AVR and CS 20 AVR Power Conditioners
These models provide 20 Amp capability and 120V Input / 120V Output. Power Conditioning and Voltage Regulation combined in one efficient high-performance unit.
Torus AVR provides stable output voltage to keep equipment running in the optimal range of 120VAC ± 5V (115V to 125V) for any input voltage ranging from 85VAC to 135VAC. AVR Series uses a microprocessor to monitor and control incoming voltages.
Torus Power AVR is a full-feature power conditioner, isolating and protecting your system. Like all Torus Power products, the AVR series provides true isolation (using massive toroidal transformers).
Torus Power AVR series protects all connected equipment from the risk of severe power line surges using series-mode surge suppression.
Technical Specification
Input Voltage Range: 85VAC to 135VAC
Frequency Range: 57-63 Hz
Input Current Limiting: 20A Circuit Breaker Front Panel
Input (inlet) connector Rear panel: 20A inlet
Line Cord (included): 20 Amp (Type D)
Input current rating: 16A
Output Voltage Range: 120VAC ± 5V (115V to 125V)
Output Current Limiting: N/A
Output connector: Medical Grade Duplex 20A (Qty 5) 10 Outlets
Surge Suppression: Meets IEEE C62.41-1991: Series mode type; built to withstand 6000 volts, 3000 amps for 1000 repeats; with clamping voltage of 2 volts above peak nominal voltage.
Noise Reduction: Performs as low pass filter, attenuating noise from 2kHz to 1mHz, with attenuation of 12 db/decade to 500 kHz.
Interfaces: RS232, Ethernet via built-in web browser
Triggers: 2 x 12volt
Weight: 100.5lbs (45.7Kg)
RM 20 AVR – 19" Rack Mount Faceplate
Size (w x d x h) (inch): 19 x 22.25 x 6.25
Size (w x d x h) (mm): 483 x 565 x 159
|
CS 20 AVR – 17" Consumer SeriesFaceplate Size (w x d x h) (inch): 17 x 22 x 6.4 Size (w x d x h) (mm): 432 x 556 x 162 |
 |