Front View                                                                                      Internal View

 Custom Installation Series – Wall Mount (NEMA) Enclosures Series

 
These models are suitable for custom installations such as studios, new construction, consumer home theatre and audio systems installation where dedicated wiring and lines will be provided. Unit is designed for a nominal 220V input / 220V output, 50Hz, other input and output configurations are available, please consult factory (eg. 220V input / 230V output).

Automatic Voltage Regulation:

Torus AVR provides stable output voltage to keep equipment running in the optimal range of 220VAC ± 10VAC (210V to 230V) for any input voltage ranging from 160VAC to 260VAC. Torus Power AVR is a full-feature power conditioner, isolating and protecting your system. Like all Torus Power products, the AVR series provides true isolation (using massive toroidal transformers). Torus Power AVR series protects all connected equipment from the risk of severe power line surges using series-mode surge suppression. The models in the Custom Series should be professionally installed by qualified electricians and/or CEDIA certified installers. Surge Suppression: Meets IEEE C62.41-1991: Series mode type; built to withstand 6000 volts, 3000 amps for 1000 repeats; with clamping voltage of 2 volts above peak nominal voltage.

Wiring conduit holes are added at installation as required to the bottom and lower side surfaces of the chassis. Wall Mount Models (WM) come with a 95 CFM Fan with controlled (normally open) 70°C Thermal Switch.
 
WM 30 INT’L AVR

Technical Specifications:

Input Voltage: Nominal 220VAC (operating range 160VAC – 260VAC)

Input Current Limiting: 1 X 30A BUSSMAN Fuse Internal
Input (inlet) connector Rear panel : N/A
Line Cord (included): N/A
Input current rating: 30A
 

Output Voltage : 220VAC ±10VAC
Output Current Limiting: 2 X 15A Circuit Breaker Internal
 

Noise Reduction : Performs as low pass filter, attenuating noise from 2kHz to 1MHz, with attenuation of 12 db/decade to 500kHz.
Interfaces: RS232, Ethernet via built-in web browser
Triggers: 2 x 12VDC

Weight: 180 lbs (81.8kg)
Size (w x d x h) (inch): 30.374 x 24.5 x 10.25
Size (w x d x h) (mm): 771.5 x 622 x 260

Notice: Installation by qualified electrician required. These units are designed for fixed, hard-wiring of input and output. Installation and wiring of these units, or any household or facility wiring, should be
performed by a licenced electrician to local codes. The final installation should also be inspected and passed by a qualified electrical inspector prior to use.
 

AVR Communications Board