NORTH AMERICAN Torus Power PRODUCTS

RM SERIES power transformer

 

RM SERIES

Technology

  • Toroidal Isolation
  • Noise Filtering
  • High Instantaneous Current Capability
  • Lightning and Surge Protection

Description

The original Torus Power models in the RM series remain unparalleled for performance, protection, and value, with models from 15 Amp to 100 Amp.

A popular model in the RM series is the RM 20, which has been consistently top-rated by leading audiophile magazines. Torus Powers power isolation units (PIUS) combine search suppression with massive toroidal transformers to provide AC power conditioning and protection from voltage surges.

The RM 20 uses a single 2400 VA toroidal transformer to supply 120V at 20A to the 10 AC outlets on its rear panel. It has a 20 a circuit breaker for its on off switch and uses a 14 AWG detachable AC cord rated at 15 amp/125V. “The PIU greatly enhances subtle details of tone, timber, and imaging when dynamics were extreme or the volume was loud”, and is a recommended component of Stereophile magazine.

Smaller models (such as RM 15) are ideal for mid-size systems, while the RM5 can be dedicated to front-end components, media servers, etc. Larger custom installation models rated 60 Amp and 100 Amp balanced input provide clean, protected power for the largest custom installed systems. Many Torus Power models feature Balanced 240V input. This configuration provides additional noise cancellation as the two input phases are 180 degrees out of phase from each other.

Torus Medical Grade Outlets on North American Models

Torus Power RM, AVR, and AVR2 series models use extra heavy duty medical grade outlets custom manufactured by Hubbell. These outlets provide greater contact force, reduced heat buildup, and redundant grounding, and are vastly superior to commercial grade outlets. Torus Power 15 Amp & 20 Amp Outlets are available for purchase.

SPECIFICATIONS

MODEL RM 15 RM 20
FACEPLATE 19 ” RACK MOUNT (RK), 17″ SILVER (CS), 17″ BLACK (CB)
CHASSIS 2U 3U
INPUT V 120 VAC
OUTPUT VOLTS 120 VAC
INPUT CURRENT LIMITING ** 1 X 15A (C) 1 X 20A  (F)
OUTPUT CURRENT 15A 20A
POWER VA 1,800 2,400
FREQUENCY 60 Hz
NO. OUTLETS 10
INLET TYPE IEC 15A IEC 20A
WEIGHT LB 46 88
WEIGHT KG 20.9 40
SIZE MM WxDxH 483 X 287 X 102 483 X 419 X 159
SIZE IN WxDxH 19 X 11.3 X 4 19 X 16.5 X 6.3

** (F) – Fuse (C) – Circuit Breaker 

MODEL RM 20 BAL RM 40 BAL RM 60  BAL RM 100 BAL
FACEPLATE 19 ” RACK MOUNT (RK), 17″ SILVER (CS), 17″ BLACK (CB)
CHASSIS 3U  4U 4U 5U
INPUT V 240 VAC
OUTPUT VOLTS 120 VAC
INPUT FUSE 1 X 10A 2 X 20A 2 X 30A 2 X 50A
OUTPUT CURRENT 20A 40A 60A 100A
POWER VA 2,400 4,800 7,200 12,000
FREQUENCY 60 Hz
NO. OUTLETS 10 12 24
INLET TYPE IEC 20A IEC20A TWIST LOCK 30A, 250V TWIST LOCK 50A, 250V
WEIGHT LB 88 121 155 216
WEIGHT KG 40 55 70.5 98
SIZE MM W X D X H 483 X 419 X 159 483 X 483 X 203 483 X 559 X 249
SIZE IN W X D X H 19 X 16.8 X 6.3 19 X 19 X 8   19 X 22 X 9.8

Input Voltage also available at 208V for BAL products feeding from a 3 phase system. Balanced Power input current is drawn at one half the output current capacities. Balanced input wiring should be installed by a qualified electrician.

More Torus Power North American Products

PowerBlock

TOT Series

RM Series

Torus Power AVR Elite

AVR ELITE

Torus Power AVR Elite

AVR-2 ELITE

WM Series

Floor Mount

All In One

Torus Power AVR Elite

AVR-2 ELITE